Dell PowerEdge FX2/FX2s - Manual (Page 308)

Field Description
Configuration
Source Specifies whether the port serves as the DCBX configuration
source on the switch: true (yes) or false (no).
Local DCBX
Compatibility
mode DCBX version accepted in a DCB configuration as
compatible. In auto-upstream mode, a port can only receive
a DCBX version supported on the remote peer.
Local DCBX
Configured mode DCBX version configured on the port: CEE, CIN, IEEE v2.5,
or Auto (port auto-configures to use the DCBX version
received from a peer).
Peer Operating
version DCBX version that the peer uses to exchange DCB
parameters.
Local DCBX TLVs
Transmitted Transmission status (enabled or disabled) of advertised DCB
TLVs (see TLV code at the top of the show command
output).
Local DCBX
Status: DCBX
Operational
Version DCBX version advertised in Control TLVs.
Local DCBX
Status: DCBX Max
Version Supported Highest DCBX version supported in Control TLVs.
Local DCBX
Status: Sequence
Number Sequence number transmitted in Control TLVs.
Local DCBX
Status:
Acknowledgment
Number Acknowledgement number transmitted in Control TLVs.
Local DCBX
Status: Protocol
State Current operational state of the DCBX protocol: ACK or IN-
SYNC.
Peer DCBX Status:
DCBX Operational
Version DCBX version advertised in Control TLVs received from the
peer device.
Peer DCBX Status:
DCBX Max
Version Supported Highest DCBX version supported in Control TLVs received
from the peer device.
Peer DCBX Status:
Sequence
Number Sequence number transmitted in Control TLVs received
from the peer device.
Peer DCBX Status:
Acknowledgment
Number Acknowledgement number transmitted in Control TLVs
received from the peer device.
308