Dell PowerEdge FX2/FX2s - Manual (Page 153)

Field Description
Interface Displays the type of interface and associated slot and port
number.
OK? Indicates if the hardware is functioning properly.
Status States whether the interface is enabled (up) or disabled
(administratively down).
Protocol States whether IP is enabled (up) or disabled (down) on the
interface.
Description Displays the description (if any) manually configured for the
interface.
Example
Dell#show interface description
Interface OK Status Protocol Description
TenGigabitEthernet 0/1 NO admin down down
TenGigabitEthernet 0/2 NO admin up down
TenGigabitEthernet 0/3 NO admin up down
TenGigabitEthernet 0/4 NO admin up down
TenGigabitEthernet 0/5 NO admin up down
TenGigabitEthernet 0/6 NO admin up down
TenGigabitEthernet 0/7 NO up down
TenGigabitEthernet 0/8 YES up up
show interfaces port-channel
Display information on configured Port Channel groups.
Syntax show interfaces port-channel [channel-number] [brief|
description]
Parameters
channel-
number For a Port Channel interface, enter the keyword port-
channel followed by a number. The range is from 1 to 128.
brief (OPTIONAL) Enter the keyword brief to display only the
port channel number, the state of the port channel, and the
number of interfaces in the port channel.
description (OPTIONAL) Enter the keyword description to display
interface information with description.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
153