Use third-party pcie analyzer, Bios enumeration issues – Altera Stratix V Avalon-ST User Manual

Page 148

Advertising
background image

Use Third-Party PCIe Analyzer

A third-party logic analyzer for PCI Express records the traffic on the physical link and decodes traffic,

saving you the trouble of translating the symbols yourself. A third-party logic analyzer can show the

two-way traffic at different levels for different requirements. For high-level diagnostics, the analyzer

shows the LTSSM flows for devices on both side of the link side-by-side. This display can help you see the

link training handshake behavior and identify where the traffic gets stuck. A traffic analyzer can display

the contents of packets so that you can verify the contents. For complete details, refer to the third-party

documentation.

BIOS Enumeration Issues

Both FPGA programming (configuration) and the initialization of a PCIe link require time. Potentially,

an Altera FPGA including a Hard IP block for PCI Express may not be ready when the OS/BIOS begins

enumeration of the device tree. If the FPGA is not fully programmed when the OS/BIOS begins its

enumeration, the OS does not include the Hard IP for PCI Express in its device map.
You can use either of the following two methods to eliminate this issue:
• You can perform a soft reset of the system to retain the FPGA programming while forcing the OS/

BIOS to repeat its enumeration.

• You can use CvP to program the device.

12-6

Use Third-Party PCIe Analyzer

UG-01097_sriov

2014.12.15

Altera Corporation

Debugging

Send Feedback

Advertising