Axel AX3000 65 User's Manual - Manual (Page 153)

Installing under Windows
AX3000 - User's Manual
141
to the Windows spooler as the default printer for the terminal.
Within the 'Session Profile' box, select 'Printer' and press <Space>. The
following box is displayed:
These parameters are:
- Port Used: printer auxiliary port (AUXx, parallel, USBx or Netx).
- Printer Name: name of the Windows printer. This value is user
selectable.
- Printer Driver: printer driver name. It is ESSENTIAL that the value
entered here matches the printer driver name exactly. If the match is not
exact Windows will not be able to connect the printer to the driver and the
printer will not be added to the Windows spooler.
- Time_out (sec): in event of a printer error (no paper, off-line, etc.), this is
the delay before the terminal reports the error to Windows.
- Default printer: set this printer as the default printer (if allowed by the
Windows server).
Note: the printer dataflow can be compressed. See Chapter 8.1.6.