Axel AX3000 65 User's Manual - Manual (Page 58)

Interactive Set-Up
46
AX3000 - User's Manual
3.7 - PASSWORD
Access to the set-up procedure can be controlled by a password.
3.7.1 - Using the Password
Select the [Configuration]-[Advanced]-[Password] dialog box to enter,
change or delete the set-up password:
Enter the following parameters:
- Enter the current password: Only if the set-up is already password
protected, you will be asked to enter the current password.
- Enter the new password: enter a new password of maximum five
characters, or press <CR> if no password is required.
- Retype password: re-enter the identical password.
3.7.2 - Entering Set-Up
If the set-up is password protected, the following dialog box will be displayed
the next time access is attempted: