Axel AX3000 65 User's Manual - Manual (Page 89)

Installing under UNIX/LINUX
AX3000 - User's Manual
77
b) Additional Parameters
Within the 'Session Profile' box, select 'Addition Parameters' and press
<Space>. The following box is displayed:
These parameters are:
- Preferred Encoding: the 'encoding' is the data format used by the VNC
server to send graphical data to the terminal. Supported encodings are:
- Hextile: original encoding supported by all VNC server versions.
-
ZRLE: newer and higher performing encoding but is only
supported by VNC server V4.
Note: with ZRLE graphical data is compressed. Axel do not yet
support decompression so this feature must be disabled at the
VNC server level. This can be done with the most recent Axel VNC
configurater (AXvnc V1.3-3 or later).
- Shared Session and Keyboard and Mouse Ignored: these parameters
allow several VNC terminals to share the same graphical display (i.e. the
same server frame buffer).
- <Ctrl><Alt><Del>: there are two modes for this keystroke:
- local: the keystroke is handled by the AX3000 and is used to
shutdown the terminal (see Chapter 4.5)
- remote: the keystroke is handled by the VNC server.