Axel AX3000 65 User's Manual - Manual (Page 33)

Interactive Set-Up
AX3000 - User's Manual
21
Domain" (supplied by the DHCP server) will be used. If "Default DNS Domain"
is empty, the name won't be registered.
The name registration can be performed by the DHCP server or by the terminal
itself. For more information see the next chapter and the appendix A.4.3.
3.1.2 - DNS Protocol
To set the DNS protocol, select the [Configuration]-[TCP/IP]-[DNS] menu.
The dialog box below is displayed:
a) DNS Servers
To resolve a name, the AX3000 sends DNS requests to a DNS server. The IP
address of this DNS server must be known. The AX3000 set-up procedure
allows two DNS servers to be entered.
Note: if 'DNS Servers' is enabled in the AX3000 Interface box (see Chapter
3.1.1) these two parameters are supplied by DHCP and cannot be accessed
here.
b) DNS Domains
A DNS domain can be used to resolve a server name or to register the terminal
name (see Chapter 3.1.3 and Appendix A.4).
Note: if the 'Default DNS Domain' is enabled in the AX3000 Interface box (see