Axel AX3000 65 User's Manual - Manual (Page 222)

Appendix
210
AX3000 - User's Manual
The following appendices give information about:
A.1 - Using the AX3000 interactive set-up
A.2 - Network overview (Ethernet address, IP address and routers)
A.3 - DHCP protocol
A.4 - DNS protocol
A.5 - Remote set-up configuration file format
A.7 - Setting the IP address by a ping command
A.8 - Administration command list
A.9 - Going further...
A.10 - Hardware and firmware information
A.1 - USING THE INTERACTIVE SET-UP
A.1.1 - Enter the Set-Up
The following can be used to enter the AX3000 interactive set-up:
- Using <Ctrl><Alt><Esc> from the terminal
- Using Telnet to access the terminal remotely.(see Chapter 10.1)
Note: the set-up can be password-protected, in which case the password must
be entered to access the quick set-up dialog box. For more information, see
Chapter 3.7.
A.1.2 - Navigation
The AX3000 set-up comprises a horizontal general menu, with drop down
vertical menus.