Axel AX3000 65 User's Manual - Manual (Page 27)

Initial Power-On
AX3000 - User's Manual
15
2.2.4 - Stage 4: Receiving the firmware download
A dialog box on the terminal screen provides the status. From this stage the
mechanism can not be aborted.
Note that firmware downloading may not have been specified by AxRM, in
which case the procedure passes directly to stage 5.
The dialog box is as shown:
AUTO-CONFIGURATION
Network detection...................100BT-FD
IP Address..........................a.b.c.d
DHCP Server.........................e.f.g.h
AxRM Server.........................i.j.k.l:n
Firmware update.....................in progress
Config update.......................
Reboot..............................
After having received the firmware the terminal reboots automatically and re-
runs stages 1, 2 and 3 before passing on to stage 5.
2.2.5 - Stage 5: Receiving the configuration file.
This is the dialog box shown when receiving the configuration file:
AUTO-CONFIGURATION
Network detection...................100BT-FD
IP Address..........................a.b.c.d
DHCP Server.........................e.f.g.h
AxRM Server.........................i.j.k.l:n
Firmware update.....................TCP.XX.0521c.STD
Config update.......................in progress
Reboot..............................
Note: if the firmware is updated the new version is displayed. After the