Axel AX3000 65 User's Manual - Manual (Page 213)

Downloading Firmware
AX3000 - User's Manual
201
6 - Change the default TFTP directory:
===> CHGTFTPA ALTSRCDIR('/axfirm')
7 - Stop and restart the TFTP server
===> ENDTCPSVR(*TFTP)
===> STRTCPSVR(*TFTP)
Then download the firmware from the AX3000 interactive set-up (see next
chapter).
11.1.5 - Under Windows
Windows operating systems don't include tftp and bootp protocols.
☺ : a Windows administration utility (AxRM or Axel Remote Management) is
available free on the Axel Web site which includes both these protocols. See
Chapter 8.8.
11.1.6 - Firmware Files Names
All Axel products have an ‘FK’ (Firmware key) number. It is important that the
firmware file and Axel hardware have the same FK number. If not the up-date
will fail. For more information, refer to Appendix A.10.
11.2 - DOWNLOADING BY TFTP PROTOCOL
To download firmware using the tftp protocol, the firmware file location (filename
and tftp host IP address) must be given.
11.2.1 - Remote Administration
The remote administration command depends on the operating system. Refer
to the Chapter 5.5 (Unix/Linux), the Chapter 6.4 (OS/400) or the Chapter 7.3
(OS/390).