Axel AX3000 65 User's Manual - Manual (Page 266)

Appendix
254
AX3000 - User's Manual
b) The 'Link' Parameter
The AX3000 10/100 network port is set by default as auto-sense. But it can also
be set as 10Mb or 100Mb. The possible value are:
- Auto-sense,
- 10BT HalfDuplex,
- 10BT FullDuplex,
- 100BT HalfDuplex,
- 100BT FullDuplex.
Note: this operating mode modification takes immediately effect.
c) The 'Telnet Set-up TCP Port' Parameter
The AX3000 interactive set-up can be accessed via a telnet connection. The
associated TCP port default value is 4096. This value can be modified.
Note: changing this value takes effect after booting the AX3000.
d) The 'Allow Network Discover' Parameter
By default, SNMP requests are supported by Axel terminals. This allows
terminals to be discovered by AxRM (the Axel administration software).
This parameter can be used to disabled the SNMP support.
Note: changing this value takes immediately effect.
e) The 'Keyboard Type' Parameter
By default PC keyboards (102/105 keys) are supported by the AX3000, but
other keyboards type are available for special use:
- AS400 (F24): 122-keys keyboard (24 function keys) for 5250 emulation,
- ANSI (F20): keyboard with 20 function keys for VT220 emulation.
Note: this keyboard type modification takes immediately effect.
Note: Do not experiment with keyboard types – ie if you do not have an AS400
keyboard do not select AS400