Axel AX3000 65 User's Manual - Manual (Page 65)

Using the AX3000
AX3000 - User's Manual
53
- automatically: when the terminal is idle (keyboard or screen) for a
certain time, the AX300 blacks out the monitor display. The display is
automatically restored as soon as a key is pressed. A dialog box allowing
the screen to be unlocked after password is entered is displayed.
- manually: the <Ctrl><Alt><Shift><S> keystroke (or the <Ctrl><Alt><S>
with a 5250 keyboard) allows the screen to be locked immediately.
An unlock-screen dialog box is displayed. Two operations are possible:
- entering the password to unlock the screen. Two passwords can be
used: the screen saver password and the set-up password (see Chapter
3.7).
- resetting the AX3000. If the password is forgotten, the only way is
selecting the [Shutdown] button. After power-cycling it, the AX3000
administrator will be able to modify or remove the screen saver
password.
Note: For the highest level of security we recommend setting the terminals ‘Set-
UP’ password.(see Chapter 3.7).
4.4 - ADJUSTING THE TFT SCREEN
TFT screens offer an auto-adjust function. This function correctly sets up the
FTF screen for best viewing in character-based mode.
However when the background colour is black or if no characters are displayed
on the top and the bottom of the screen this feature may fail.
To solve this problem a hot-key function is available: <Ctrl><Alt><Shift><A>.
After pressing this keystroke a dedicated screen set-up is displayed which
allows the auto-adjust function to work properly.