Axel AX3000 65 User's Manual - Manual (Page 77)

Installing under UNIX/LINUX
AX3000 - User's Manual
65
There are three groups of programmable keys:
- from F1 to F48: function keys used singly or with a modifier key. Example
for ANSI emulations:
F1 to F12: <Fx>
F13 to F24: <Shift><Fx>
F25 to F36: <Ctrl><Fx>
F37 to F48: <Ctrl><Shift><Fx>
- numeric pad with Number Lock off
- special keys: Esc, Backspace and the ‘dot’ of the numeric pad.
To enter a programmable key value select the key label then press <Space>.
The following dialog box is displayed:
The main field is used to enter the programmable key value. ASCII codes lower
than 20h can be entered as '\xx' (where xx is the hexadecimal value of the
ASCII code).
Note: for the 'Backspace' key and the numeric pad dot, a toggle is only
available (two possible values for each key).
Memory usage for programming keys is limited to:
- 32 bytes maximum for any single key,
- 255 bytes maximum for a whole session.
5.1.5 - Colouring Mode
A background colour, plus a foreground colour for each monochrome character
attribute or graphics character, may be set through the Colouring Mode. This
function allows monochrome applications to be displayed in colour.
The "Colouring Mode" parameter offers 2 values:
- standard: 6 colouring attributes
- enhanced: 16 colouring attributes