Axel AX3000 65 User's Manual - Manual (Page 43)

Interactive Set-Up
AX3000 - User's Manual
31
- full-speed (12 Mbits): printers
- Maximal consumption: 500 mA (for both USB ports)
Important Note: power hungry non-computing USB devices must not be
connected to the terminal (fans, lights, etc..) as they have the potential to draw
too much current and cause the terminal to behave erratically.
The following USB devices are supported:
- keyboard,
- barcode reader,
- mouse,
- HUB,
- printer.
Other USB devices are detected but not supported.
USB devices may be hot-plugged. They are dynamically detected by the Axel
terminal.
Maximum number of connected USB devices:
- two keyboards and barcode readers,
- two mice,
- two HUBs,
- four printers.
3.4.2 - Connecting a USB Keyboard
The USB keyboard is automatically detected by the Axel terminal.
The USB keyboard settings (nationality, LED initialization...) are displayed and
can be changed in the AX3000’s General Parameters. For more information
see Chapter 3.2.2.
Note: multiple keyboards (USB and/or PS2) can be connected. The same
settings are used for both and they can be used simultaneously.
3.4.3 - Connecting a USB Barcode Reader
The USB barcode reader is automatically detected by the Axel terminal. A