Axel AX3000 65 User's Manual - Manual (Page 36)

Interactive Set-Up
24
AX3000 - User's Manual
To configure the router table, select the [Configuration]-[TCP/IP]-Routers]
menu. A dialog box as shown below is displayed:
Default Router: to specify a default router enter its IP address. If a default
router is not required, leave this field blank. If 'Default Router' is enabled in the
AX3000 Interface box, this parameter is automatically supplied by DHCP and
cannot be accessed.
To Add a Router: move the highlight bar to a vacant line and enter the router
parameters.
To Delete a Router: select the router to be deleted from the menu and press
[DELETE].
To Change a Router: move the highlight cursor over a router parameter and
enter the new value.