Axel AX3000 65 User's Manual - Manual (Page 212)

Downloading Firmware
200
AX3000 - User's Manual
A file ‘tftp’ should be present in /etc/xinetd.d. This file contains the tftp server
settings. Check the content of the file is as shown below:
service tftp
{
socket_type = dgram
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args = /
disable = no
}
Reboot if you modified any of these settings.
Note: for a legacy Linux version, see the Chapter 11.1.2.
11.1.4 - Under OS/400
The TFTP protocol is available as a standard feature on OS/400, but must be
correctly set to match with the AX3000 requirements.
1 - Create a directory
===> CRTDIR DIR('axfirm')
2 - Copy the firmware file (for example ax3000) on /axfirm.
3 - Change the directory "/axfirm" QTFTP user's rights:
===> CHGAUT OBJ('/axfirm') USER(QTFTP) DTAAUT(*RX) OBJAUT(*NONE)
4 - Change the file "/axfirm/ax3000" QTFTP user's rights:
===> CHGAUT OBJ('/axfirm/ax3000') USER(QTFTP) DTAAUT(*RX) OBJAUT(*NONE)
5 - User's right can be checked by invoking:
===> WRKLNK OBJ('/axfirm')
===> WRKLNK OBJ('/axfirm/ax3000')