Axel AX3000 65 User's Manual - Manual (Page 264)

Appendix
252
AX3000 - User's Manual
The following table lists the available AX3000 administration commands:
Command Description
ax_reboot
Rebooting the AX3000.
Example: rsh ax3000 ax_reboot [password]
More information: chapter 10.2
ax_sinit Resetting an AX3000 resource (screen session or aux. port)
Example: rsh ax3000 ax_sinit [password] sess1
setup_get Requesting the AX3000 Set-Up.
Example: rsh ax3000 setup_get > file
More information: chapter 10.2
setup_send Setting-up the AX3000 through a text file.
Example: rsh ax3000 setup_send [password] < file
More information: chapter 10.2
ax_download Requesting an AX3000 firmware downloading.
Example: rsh ax3000 ax_download [password] 192.1.1.1 file
More information: chapter 11
ax_version Requesting the AX3000 firmware revision.
Example: rsh ax3000 ax_version
ax_getstat Requesting the AX3000 statistics.
Example: rsh ax3000 ax_getstat
More information: chapter 9.3
Note: these commands are also available with uppercase characters
(ax_version and AX_VERSION are the same command).
A.9 - MORE INFORMATION...
A.9.1 - Reload Factory Settings
The menu [Configuration]-[Advanced]-[More]-[Factory Settings] allows,
after confirmation, terminal factory settings to be reloaded. The current
configuration is lost.
On next boot , the Quick Set-Up will be displayed and the Auto-Configuration
service will be started (see Chapter 2).