Rena T-650 - Manual (Page 13)

GETTING ACQUAINTED
SECTION 2 – Assembly and Installation
Choose a Location
Place the T-650 with its feeder on a sturdy worktable or cabinet at least 12 inches from any
walls. Allow enough room to place the Feeder on the same work surface. Protect the T-650
from excessive heat, dust, and moisture – avoid placing it in direct sunlight.
CAUTION
THE UNIT IS HEAVY.
IT IS STRONGLY RECOMMENDED THAT TWO TECHNICIANS REMOVE THE
TABBER FROM THE CARTON AND PLACE IT ON THE WORKING SURFACE.
Installing the Reel Assemblies
Reel Assembly (H2) Reel Assembly (H1)
T-650 Operations REV. 8/25/2010 13