Rena T-650 - Manual (Page 86)

OPERATION
11. When you are finished, press the BACK key (3) twice.
12. Close and lock the Exit Roller Assembly.
13. Lower the Pressure Roller Release Latch.
14. From the Select Setup Option screen
select Manual.
15. The Select Tabber Head screen
appears. Select Head #2.
16. The Selection Option screen appears.
Select None to turn Head 2 off, since
we will not be using this head
17. The Select Tabber Head screen will
reappear.
Select Head #1. The head that will
apply the Stamps in this case.
18. The Select Option screen will appear.
Select Tab/Stamp.
T-650 Operations REV. 8/25/2010 86