Rena T-650 - Manual (Page 80)

OPERATION
23. The Enter Offset for Tab 1 screen will appear.
In this example, the USPS requires that
the first tab be positioned less than 1”
from the right or bound edge, so the
position of Tab 1 should not be greater
than 1” from the leading edge.
Enter the desired value, in this case
0.900”, using the number keys on the
control panel, and press the Save key.
24. Press the BACK key.
25. The Select Tab Offset screen will
reappear.
Select Tab 2.
26. The Enter Offset for Tab 2 screen will
appear.
The USPS requires that the second tab
be positioned less than 1” from the left
edge of the mail piece. In our case; due
to the orientation of the media through
the tabber, the position of Tab 2 should
be within 1” of the trailing edge.
In this example the piece is 10.5” long and we are using 1.5” tabs, as required, so the
setting would be about 8.100”. ((10.5” piece length – 1.5” tab – 0.9” (within 1”) =
8.100”))
Enter the position for tab 2 using the number keys, in our case 8.100” and then press the
Save key.
27. Press the BACK key five times, to
return to the Select Setup Option
screen.
28. Select V-Tab from this screen.
T-650 Operations REV. 8/25/2010 80