Rena T-650 - Manual (Page 98)

OPERATOR MAINTENANCE
Tab Wrap Guides
Each of the Media Side Guide Assemblies has a Tab Wrap Guide at the end of it. This guide is
used to wrap the tab under the back side of the media, before it is sealed by the pressure rollers.
In the process of wrapping tabs; adhesive will build up along this guide. After awhile this
adhesive accumulation can restrict the tab from smoothly transitioning through this guide.
Both of the guides and the slots should be periodically cleaned with a thin rag, dampened with
WD-40, to remove the adhesive residue, as shown below. After cleaning; wipe any excess WD-
40 from the surfaces using a clean dry cloth.
WARNING
THE TABBER IS A PRECISION MACHINE THAT SHOULD BE CLEANED
REGULARLY TO INSURE MANY YEARS OF SERVICE. BEFORE PERFORMING
ANY MAINTENANCE, DISCONNECT IT FROM ITS POWER SOURCE!
Cleaning the Tab Wrap Guide
Located at the exit end of the
Left Media Guide Assembly.
Cleaning the Tab Wrap Guide
Located at the exit end of the
Right Media Guide Assembly.
T-650 Operations REV. 8/25/2010 98