Rena T-650 - Manual (Page 73)

OPERATION
42. This will return us to the Select Option
screen for Head 1.
Select Pitch.
NOTE: Whether programming
manually or automatically you must set
the pitch to ensure good registration of
43.
p of one tab to the
he stock you are
s 1.63” plus 0.01” for a
Control Panel and then pressing the
ave key.
44. the
elect Option screen for Head 1.
45. lick on the Position key.
46. Offset for Tab 1 screen
hould be
ithin 1” of the trailing edge.
etting would be about 5.600”. ((8” piece length – 1.5” tab – 0.9” (within 1”) = 5.600”))
osition for the tab using the number keys, in our case 5.600” and then press the
the tab.
The Pitch of the tab is the distance
measured from the to
top of the next tab.
Measure the pitch of t
using and add 0.01”.
In this case it wa
total of 1.64”.
Enter the pitch value using the number
keys on the
S
Press BACK one time to return to
S
C
The Enter
appears.
The USPS requires that the tab be
positioned less than 1” from the top
edge of the mail piece. In our case; due
to the orientation of the media through
the tabber, the position of tab s
w
In this example the piece is 8.0” long and we are using 1.5” tabs, as required, so the
s
Enter the p
Save key.
T-650 Operations REV. 8/25/2010 73