JLG X23J - X700AJ Service Manual - Manual (Page 102)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-75
31. Remove the O-ring seal (55) from its seat in the two
speed control connector (57).
32. Unscrew the nos. 6 socket head screws M10x20 (58),
grade 12.9, of the base plate (40) by a male hex head
wrench.
REMOVE CAREFULLY THE BASE PLATE (40) UNTIL
PINS (39) ARE COMPLETELY OUT.
33. Take out the two speed spool (53).
34. Take out the spring (54).
35. View of the loose parts.