JLG X23J - X700AJ Service Manual - Manual (Page 74)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-47
8. By means of the tool (ATZ.04.008.0), carry out the
assembly of the half seal (14) on the flanged hub
(15).
Figure 3-127.
9. Clean carefully the metallic faces of the lifetime seal
(14), and Lube them with a thin oil film.
Figure 3-128.
10. Place the flanged hub (15) inside the gearbox hous-
ing (9).
Figure 3-129.
11. By using a press and a metal stopper push the
flanged hub (15) against the gearbox housing shoul-
der (9) until assembly of the unit is complete.
Figure 3-130.