JLG X23J - X700AJ Service Manual - Manual (Page 114)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-87
3. Tighten the plugs (52) in the base plate (40) by a torque
wrench at 5 ± 0,5 Nm torque.
4. Assemble the bearing (37) into its seat in the base plate
(40).
5. Place the valve plate (36) on the base plate (40).
BRONZE LAYER SURFACE MUST BE UPWARDS.
6. Place the base plate (40) on the flanged hub (18).
THE BASE PLATE IS CENTERED BY TWO PINS (39)
AND THE SECOND SPEED OIL PASSAGES MUST
MATCH TOGETHER.
7. Fix the base plate (40) to flanged hub (18) by using nos.
8 socket head screws M10x20 (58), grade 12.9, tightened
by a torque wrench at 64 ± 5 Nm torque.