JLG X23J - X700AJ Service Manual - Manual (Page 115)

SECTION 3 - CHASSIS & TURNTABLE
3-88 – JLG Lift – 3121448
8. By using the stopper (6689962090) assemble the O-
ring (42) in its seat in the plug (41).
9. Tighten the plug (41) by a torque wrench at 23,5 ± 1
Nm torque.
Reassembly of the two speed control
10. By using the stopper (6689960740) assemble the O-
ring (55) in its seat in the plug (56).
11. Tighten the plug (56) of the two speed control by a
torque wrench at 54 ± 5 Nm torque.
12. Insert the spring (54) in the two speed spool (53).
13. Insert the two speed spool (53) in the base plate (40).
TWO SPEED SPOOL HAVE TO MOVE SMOOTHLY
INSIDE ITS SEAT IN THE BASE PLATE (40).