JLG X23J - X700AJ Service Manual - Manual (Page 492)

SECTION 6 - JLG CONTROL SYSTEM
3121448 – JLG Lift – 6-3
Position 1
Reduced operating area if all outriggers are not fully
deployed.
Position 2
Displays the capacity based on jib position.
Position 3
Displays the selected engine (gas/diesel or electric) and
whether it is on or off. The X on the icon indicates the
engine is off.
Position 4
Displays the selected engine speed.
Position 5
Displays that the outriggers are properly set and boom
functions are allowed.
No display indicates that the outriggers are not properly
set and boom functions are not allowed.
If an overload occurs the main screen goes blank for 3
seconds followed by the overload error display and an
alarm.
Position 6
Indicates that boom, jib, turntable and base are aligned.
Drive, steer, track width adjustment and outrigger func-
tions are operational if this symbol below is present. No
symbol indicates these functions are not operational.
Drive and steer are operational if all 4 outriggers are not
contacting the ground.
1 2
3 4
5 6
7 8
1 2
3 4
5 6
7 8
1 2
3 4
5 6
7 8
1 2
3 4
5 6
7 8
1 2
3 4
5 6
7 8
1 2
3 4
5 6
7 8