JLG X23J - X700AJ Service Manual User Manual
Page 107
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3-80
– JLG Lift –
3121448
58. Take out the brake disc (M14).
59. Remove the swash plate (M10) from the flenged hub
(M2).
60. Take out the nos. 2 two speed control pistons (M5)
from the flanged hub (M2).
61. Take out the nos.2 two speed control springs (M4)
from their seats in the flanged hub (M2).
62. Take out the nos.2 steel balls (M3) from their seats in
the flanged hub (M2).
63. By using a puller, take out the motor shaft (M9) and
the bearing (M8) from the the flanged hub (M2).
Advertising
This manual is related to the following products: