JLG X23J - X700AJ Service Manual - Manual (Page 57)

SECTION 3 - CHASSIS & TURNTABLE
3-30 – JLG Lift – 3121448
20. By using pliers remove the circlip (8) from its seat in
the flanged hub (15).
Figure 3-53.
NOTE: In order to proceed with the gearbox disassembly, it
is now necessary to remove it from the ma-chine and
bring it to a properly equipped workshop. By using a
puller, push on the metal stopper and remove the
flanged hub (15) from the gearbox housing (9).
Figure 3-54.
21. Fix the equipment (ATZ.05.014.0) at the bearing
(14).
Figure 3-55.
22. By using a puller remove the bearing (14) remaining
on the flanged hub (15).
Figure 3-56.
INFORMATION
IN CASE OF OIL LEAKAGES, IT MIGHT BE NECES-
SARY TO CHECK AND EVENTUALLY REPLACE THE
LIFETIME SEALS (14), WHICH MEANS BOTH THE
METAL RINGS PARTS AND THE O-RING SEALS.