JLG X23J - X700AJ Service Manual - Manual (Page 214)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-187
MUFFLER
REMOVAL/INSTALLATION
THE MUFFLER BECOMES VERY HOT DURING OPERATION
ANDREMAINS HOT FOR A WHILE AFTER STOPPING THE ENGINE.
BE CAREFUL NOT TO TOUCH THE MUFFLER WHILE IT IS HOT.
AL-LOW IT TO COOL BEFORE PROCEEDING.
SOLID PROTECTOR TYPE
Remove the muffler cover (if equipped).
MUFFLER PROTECTOR
MUFFLER
EXHAUST
PIPE GASKET
SPARK ARRESTER
TAPPING SCREW
(5 x 8 mm) (4)
NUT (8 mm)
TAPPING SCREW (5
x 8 mm) (2)
TAPPING SCREW
(6 x 10 mm)
EXHAUST
PIPE
(If equipped)
EXHAUST PIPE
PROTECTOR
(If equipped)
(If equipped)
BAFFLE FLANGE
(If equipped)
CLEANING:
Before installing, clean the spark arrester.
24 N·m (2.4 kgf·m, 17 lbf·ft)
NUT (8 mm) (2)
24 N·m (2.4 kgf·m,
17 lbf·ft)
BOLT (6 x 12 mm)
MUFFLER
GASKET
(If equipped)
MUFFLER
GASKET
(If equipped)