JLG X23J - X700AJ Service Manual - Manual (Page 157)

SECTION 3 - CHASSIS & TURNTABLE
3-130 – JLG Lift – 3121448
USED ENGINE OIL CONTAINS SUBSTANCES THAT HAVE BEEN
IDENTIFIED AS CARCINOGENIC. IF REPEATEDLY LEFT IN CON-
TACT WITH THE SKIN FOR PROLONGED PERIODS, IT MAY CAUSE
SKIN CANCER. WASH YOUR HANDS THOROUGHLY WITH SOAP
AND WATER AS SOON AS POSSIBLE AFTER CONTACT WITH
USED ENGINE OIL.
Install a new drain plug washer (3) and tighten the drain
plug bolt (2) to the specified torque.
TORQUE:22.5 N·m (2.25 kgf·m, 17 lbf·ft)
Fill with recommended oil to the upper level mark of the oil
level dipstick (page 3-3).
Engine oil capacity: 1.1 (1.16 US gal, 0.97 Imp gal)
Tighten the oil filler cap securely.
AIR CLEANER CHECK/CLEANING/
REPLACEMENT
DUAL ELEMENT TYPE:
A dirty air filter will restrict air flow to the carburetor, reduc-
ing engine performance. If the engine is operated in dusty
areas, clean the air cleaner more often than specified in
the MAINTENANCE SCHEDULE.
OPERATING THE ENGINE WITHOUT THE AIR FILTERS OR WITH
THE FILTER INSTALLED LOOSELY WILL ALLOW DIRT TO ENTER
THE ENGINE, CAUSING RAPID ENGINE WEAR. INSTALL THE AIR
FILTERS SECURELY.
Remove the nut (1) and the air cleaner cover (2).
Remove the wing nut (3) and air filter assembly (4)(5).
Separate the inner filter (Paper) (4) from the outer filter
(Foam) (5). Carefully check both filters for holes or tears
and replace if damaged.
Clean the filters if they are to be reused.
Install the elements in the reverse order of removal.
(5)
(2)
(3)
(4)
(1)