JLG X23J - X700AJ Service Manual - Manual (Page 129)

SECTION 3 - CHASSIS & TURNTABLE
3-102 – JLG Lift – 3121448
Install the Valve plate (15) on the wheel ass’y.
Install the Drive (24) into the motor.
Align the marked spline with the Valve’s marking. Align the
marked spline with the above Valve plate holes.
Please attend these holes and top of Star.
Install the O-ring (31) on the Valve plate (15). Install the
Geroler (1) on the Valve plate (15).
Align top of Star with marked Drive spline.
If you mistake the valve timing, motor turns in the
opposite direction. Please be careful.
Marked spline