JLG X23J - X700AJ Service Manual User Manual

Page 310

Advertising
background image

SECTION 3 - CHASSIS & TURNTABLE

3121448

– JLG Lift –

3-283

Model with fuel filter in fuel tank

– Open the tank cover and pull the fuel filter out of the tank
by its cord.

– Pull fuel supply line „1“off fuel filter „2“and insert a new
filter.

– Fit the fuel filter again and close the tank cap. Bleeding
of the fuel injection system takes place automatically.

MODEL WITH EXTERNAL FUEL FILTER

(no fuel filter in the tank)

– Empty the fuel tank by taking out screw „1“, (chapter
Checking the water trap) and allow the fuel to drain into a
clean vessel. This fuel can be reused later.

– Unscrew the fuel filter from its mount.

– Place a suitable vessel under the filter to trap the resid-
ual fuel.

– Pull off fuel supply line „1“at both ends of fuel filter „2“
and insert the new filter.

fig. B

2441 / 8

Advertising