JLG X23J - X700AJ Service Manual - Manual (Page 440)

SECTION 5 - HYDRAULICS
5-14 – JLG Lift – 3121448
SENSOR ASSEMBLING
Spacer has chamfer.
Figure 5-33.
Mount spacer with chamfer face outside.
Figure 5-34.
Lubricate the o-ring
Figure 5-35.
Joint the sensor pin with a guidance cable.
Figure 5-36.
Insert sensor with a cable pass
Figure 5-37.
Use plastic tool to insert the sensor
Figure 5-38.
Push the tool carefully
Figure 5-39.