JLG X23J - X700AJ Service Manual - Manual (Page 113)

SECTION 3 - CHASSIS & TURNTABLE
3-86 – JLG Lift – 3121448
21. Insert the brake piston (M27) inside the flanged hub
(M2), being careful not to damage the seals already fitted.
22. Assemble the O-ring seal (M6) into its seat in the flan-
ged hub (M2).
23. Insert the springs (M28) in their seats in the brake
piston (M27).
Reassembly of the base plate
1. Insert the orifices (51) in the base plate (40) and tighten
by a torque wrench at 2,5 ± 0,5 Nm torque.
2. Seal the thread of the plugs (52) by "Teflon" tape.
INFORMATION
BE SURE THAT THE TAPE IS CORRECTLY WINDED
AROUND THE PLUGS (52).