JLG X23J - X700AJ Service Manual - Manual (Page 118)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-91
25. By using the stopper (6689960740) assemble the O-
ring seals (62) in their seats in the plug (61).
26. Manually screw the nos. 2 plugs (61) in the valve
housing (66).
27. Assemble the O-rings (67) into their seats in the valve
housing (66).
28. Place the anticavitation valve (66) on the base plate
(40).
29. Tighten the nos. 3 socket head screws M8x35 (68),
grade 10.9, by a male hex head torque wrench at 37 ± 2
Nm torque.
30. Tighten the nos. 2 plugs (61) in the valve housing (66),
by a torque wrench, at 54± 5 Nm torque.