JLG X23J - X700AJ Service Manual User Manual
Page 127
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3-100
– JLG Lift –
3121448
Install the O-ring (31), (32).
Install the Endcover ass’y (36), and the bolts (29). Align
four holes the wheel ass’y with the Endcover.
Torque all 4 bolts alternately to 35 N-m.
Pour the Gear oil into the Spindle / wheel ass’y (5).
Quantity TRC series: 100 cm3
TRB series: 55 cm3
Gear oil: SHELL SPIRAX EP90
Install the Spacer (25) in the wheel ass’y.
four holes
Advertising
This manual is related to the following products: