JLG X23J - X700AJ Service Manual - Manual (Page 189)

SECTION 3 - CHASSIS & TURNTABLE
3-162 – JLG Lift – 3121448
CHARGE / LAMP COIL (IF EQUIPPED)
REMOVAL/INSTALLATION
Remove the following parts:
–Fan cover.
–Ignition coil.
–Remove the flywheel.
Remove the coil connector or connectors.Installation is in
the reverse of removal.Install the cord clamp.
Adjust the governor.
10 A CHARGE COIL /
12 V-50 W LAMP COIL
BOLT (6 x 40 mm) (4)
BOLT (6 x 12 mm)
CORD GROMMET
CORD CLAMP
10 A CHARGE COIL / 12 V-50 W
LAMP COIL TYPE: