8 boot-up telegram, 1 telegram structure, Telegram structure – Lenze 931M-931W User Manual
Page 56: Canopen communication
![background image](/manuals/565945/56/background.png)
CANopen communication
Heartbeat telegram
Boot-up telegram
5
56
KHB 13.0003-EN 2.0
5.8
Boot-up telegram
After the supply voltage has been switched on or after a reset, the drive controller sends
the boot-up telegram indicating that the initialisation phase is completed. The controller
then is in the NMT state pre-operational.
5.8.1
Telegram structure
11 bits
4 bits
User data (1 byte)
1st byte 2nd byte 3rd byte
4th byte 5th byte 6th byte 7th byte 8th byte
Identifier
Data
length
0
The structure of the boot-up telegram is almost identical to the structure of the heartbeat
telegram.
The boot-up telegram is also sent with the identifier 700
h
+ node address. The data length
is 1.
The only difference is that a zero is sent instead of the NMT state. For boot-up telegrams,
too, the sending device expects – depending on the error management setting – the
receipt of the telegram to be acknowledged by the other bus devices.