Lenze 931M-931W - Manual (Page 88)

Parameter setting
Device information
Description of the objects
7

88 KHB 13.0003-EN 2.0
7.8 Device information
7.8.1 Description of the objects
Index Name Possible settings Characteristics
Lenze Selection Description
6410
h
Motor_data
1 resolver_offset 1 0 {1 inc} 4096 VAR UINT16 RW —
Setting the resolver offset.
2 number_of_pole_
pairs
2 1 {1} 13 VAR UINT16 RW —
Setting the pole pair number.
Bit No. Meaning
0 ... 3 Pole pair number
4 Reversal of direction of resolver
3 braking _times {1 ms} VAR UINT32 RW —
Setting the disengagement
and engagement time of the
brake.
Bit No. Meaning
0 ... 15 Disengagement time
16 ... 31 Engagement time
4 brake_voltage 001A0012 {1 V} VAR UINT32 RW —
Setting the value range for
the brake voltage.
Bit No. Meaning
0 ... 15 Minimum limit value (18 ... 22 V)
16 ... 31 Maximum limit value (26 ... 32 V)
6510
h
Drive_data
0 number_of_
supported_entries
00
h
{1
h
} 03
h VAR
UINT8 RO —
Maximally supported
subindices.
03
h
Four subindices are
supported.
1 identification VAR UINT32 RO —
Reading the identification.
2 serial_number VAR UINT32 RO —
Reading the serial number.
3 operating_minutes VAR UINT32 RO —
Reading the operating
minutes.