Adjusting auto reel speed (lexion 500 series) – MacDon FD75 OM User Manual
Page 133
Adjusting Auto Reel Speed (Lexion 500 Series)
The preset reel speed can be set when the automatic header functions are activated.
NOTE:
Changes may have been made to the combine controls or display since this document was published.
Refer to the combine operator’s manual for updates.
To set the preset reel speed, follow these steps:
1.
Use the “<” key or the “>” key to select reel window.
When reel window is selected, window (E15) will
display the current advance or retard speed of the reel
relation to the ground speed.
Figure 4.159: Combine Display
2.
Press the “OK” key (C) in order to select the reel
speed window.
3.
Use the “-” key (A) or use the “+” key (B) in order to set
the reel speed in relation to the current ground speed.
Window (E15) will display the selected reel speed.
Figure 4.160: Combine Controls
169894
119
Revision A