MacDon FD75 OM - Manual (Page 378)

MAINTENANCE AND SERVICING
5. Remove four bolts (A) attaching reel tube to U-joint
flange (B) and move reel sideways to disengage stub
shaft from U-joint.
Figure 6.230: U-Joint
6. Remove six bolts (A) attaching U-joint flange (B) to
driven sprocket (C).
7. Remove U-joint.
NOTE:
Right hand reel may need to be moved sideways
for U-joint to clear reel tube.
Figure 6.231: U-Joint
Installing U-Joint
To install the U-joint, follow these steps.
NOTE:
Right hand reel may need to be moved sideways
for U-joint to clear reel tube.
1. Position U-joint flange (B) onto driven sprocket (C) as
shown. Install six bolts (A) and hand-tighten. Do NOT
torque at this time.
Figure 6.232: U-Joint
169894 364 Revision A