11reel endshields, Replacing endshield, Reel endshields – MacDon FD75 OM User Manual
Page 398: 11 reel endshields
Advertising
6.12.11
Reel Endshields
The reel endshields and supports do not require regular maintenance but should periodically be checked for damage
and loose or missing fasteners. Endshields or supports that are slightly dented or deformed may be repaired.
Severely damaged components should be replaced.
Reel endshields can be attached to either end of the reel.
Replacing Endshield
1.
Lower header and reel, and shutdown engine. Remove key from ignition.
2.
Manually rotate reel for access to endshield (A) to
be replaced.
3.
Remove three bolts (B).
Figure 6.280: Endshields
4.
Lift end of endshield (A) off support (B).
Figure 6.281: Endshields
169894
384
Revision A
Advertising