MacDon FD75 OM User Manual
Page 395
Advertising
6.
Line up tine bar (B) with cam arm and install bolt (A).
Torque bolt to 120 ft·lbf (165 N·m).
Figure 6.273: Cam End
7.
At the center disc, install the bolts (A) securing arm (B)
to disc.
8.
At the tail end, install reel arm (B) and endshield
support (C) from the tail end of the reel at applicable
tine tube location with bolts (A).
NOTE:
There
are
no
endshields
on
the
center disks.
Figure 6.274: Tail End
9.
At the cam end, install endshield support (A) at
applicable tine tube location on the cam end.
10. Re-install endshields.
Figure 6.275: Cam End
169894
381
Revision A
Advertising