MacDon FD75 OM - Manual (Page 227)

HEADER ATTACHMENT/DETACHMENT
5.5 New Holland Combines
5.5.1 Attaching Header to New Holland CR/CX Combine
To attach header to New Holland combines, follow
these steps:
Figure 5.56: Attaching Header
1. Ensure handle (A) is positioned so that hooks (B) can
engage adapter.
Figure 5.57: Feeder House Locks
2. Start engine and slowly drive combine up to header
until feeder house saddle (A) is directly under the
adapter top cross member (B).
3. Raise feeder house to lift header, ensuring feeder
saddle is properly engaged in adapter frame.
CAUTION
Stop engine and remove key from ignition before
leaving operator's seat for any reason. A child or
even a pet could engage an idling machine.
Figure 5.58: Header on Combine
169894 213 Revision A