Storing tow-bar – MacDon FD75 OM User Manual
Page 188
Advertising
5.
Remove
clevis
pin
(A)
and
set
aside
for
later installation.
6.
Push latch (B) and lift tow-bar (C) from hook.
Release latch.
7.
Reinstall clevis pin.
Figure 4.259: Tow-Bar Latch
Storing Tow-Bar
Store tow-bar as follows:
1.
On the LH side of the header, place the inner end
of the outer half of the tow-bar in cradle (A) on
header backtube.
2.
For clevis or pintle end of tow-bar, secure in support (B)
on endsheet with hitch pin (C). Secure with lynch pin.
3.
Install rubber strap (D) on cradle (A).
Figure 4.260: Tow-Bar Storage
A - Cradle
B - Support
C - Hitch Pin
D - Rubber Strap
169894
174
Revision A
Advertising