5electrical, 1replacing light bulbs, Electrical – MacDon FD75 OM User Manual
Page 292: Replacing light bulbs, 5 electrical, 1 replacing light bulbs
Advertising
6.5
Electrical
Use electrical tape and wire clips as required to prevent wires from dragging or rubbing.
Keep lights clean and replace defective bulbs.
6.5.1
Replacing Light Bulbs
To replace a light bulb, follow these steps:
1.
Using a Phillips screwdriver, remove screws (A) from
fixture and remove plastic lens.
2.
Replace bulb and reinstall plastic lens and screws.
NOTE:
Use bulb trade #1156 for amber clearance lights
and #1157 for red tail light (Slow Speed Transport
option).
Figure 6.43: Clearance Light
169894
278
Revision A
Advertising