Side draper deck idler roller, Removing side draper idler roller – MacDon FD75 OM User Manual
Page 355
Advertising
![background image](/manuals/570554/355/background.png)
Side Draper Deck Idler Roller
Removing Side Draper Idler Roller
1.
If draper connector is not visible, engage the header
until the connector is accessible, preferably close to the
outboard end of the deck.
2.
Raise header and reel, shutdown the combine.
3.
Engage combine safety props and reel lift cylinder
safety props.
4.
Loosen
draper
by
turning
adjuster
bolt
(A)
counterclockwise.
Figure 6.174: Tensioner
5.
Remove fasteners (A) and tube connectors (B) at the
draper joint to uncouple the draper.
6.
Pull the draper off the idler roller.
Figure 6.175: Draper Connector
169894
341
Revision A
Advertising