MacDon FD75 OM - Manual (Page 294)

MAINTENANCE AND SERVICING
6.6.2 Installing Driveline
To install the driveline, follow these steps:
CAUTION
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
IMPORTANT:
If combine output shaft splines match adapter input shaft splines, ensure driveline is installed with longer
guard at adapter gearbox end.
IMPORTANT:
Ensure driveline is concurrent with length specifications. Refer to 3 Specifications, page 27 .
1. Slide driveline in hook (A) so that disc (B) drops to
secure driveline.
Figure 6.46: Driveline
2. Slide shield (B) over driveline.
3. Position driveline quick disconnect onto adapter
gearbox shaft, pull back collar, and slide onto shaft
until yoke locks onto shaft. Release collar.
4. Position shield (B) on gearbox and secure with nuts (A).
5. Reconnect other end to combine if necessary.
Figure 6.47: Driveline
169894 280 Revision A