MacDon FD75 OM - Manual (Page 295)

MAINTENANCE AND SERVICING
6.6.3 Removing Driveline Guard
The main driveline guard normally remains attached to the driveline, but can be removed for maintenance.
CAUTION
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
NOTE:
The driveline does NOT need to be removed from the adapter in order to remove the driveline guard.
To remove a main driveline guard, follow these steps:
1. Rotate disc (B) on adapter driveline storage hook (A),
and remove driveline from hook.
Figure 6.48: Driveline
2. Lift combine end of driveline (A) from hook, and
extend driveline until it separates. Hold adapter end
of driveline to prevent it from dropping and hitting the
ground.
Figure 6.49: Guard
169894 281 Revision A